LOG IN

Share

MR Car Design tunes the Volkswagen Passat CC

 MR Car Design tunes the Volkswagen Passat CC
Volkswagen Passat CC by MR Car Design 26.11.2012

Boasts 502 HP

The Volkswagen Passat CC has always favored style over substance, so MR Car Design decided to fix that by turning the four-door coupe into a true driver's car.

Starting with a pre-facelift model equipped with all-wheel drive and a 300 HP (221 kW) 3.6-liter V6 engine, the tuner installed an HGP Turbo upgrade package which enables the mill to develop an impressive 502 HP (369 kW) and 700 Nm (516 lb-ft) of torque - an increase of 202 HP (149 kW) and 350 Nm (258 lb-ft).

The tuner also added a KW DDC coilover suspension, H&R stabilizer bars, Stoptech and EBC brakes as well as 18-inch OZ Ultraleggera wheels.

The end result is described as "pretty decent" which is modesty at its finest.

Source: MR Car Design

Pretty decent - Passat CC with 502 hp

The four-door coupé from Volkswagen called the Passat CC (this stands for Comfort Coupe) was first introduced in Detroit in 2008 and it was put into his cradle, that he fills at least a part of the gap between the conventional Passat and the Phaeton by means of an increased security level, in any case this were the ideas of the makers.

To enhance the image of the supposed usual car, which couldn't be shaken off despite intense efforts, the firm MR Car Design from Erfstadt has decided to become the Lord over this performance problem. The all-wheel drive Volkswagen CC, as he is officially called since the beginning of 2012, goes from house with a 3.6-liter V6 engine, i.e. equipped with 300 Series hp at 350 Nm of torque, as well as with all-wheel drive. After an extensive treatment a la HGP Turbo Upgrade GmbH, Ohmden (BW) at the Service Point Cologne (MR Car Design), impressive 502 hp and 700 Nm of max. Torque are available, so perfect conditions for the famous wolf in the even more famous sheep's clothing! Also the installed exhaust system by MR Car Design had to endure some modifications.

In addition to a DDC coilover suspension (with a motorized damper system for DCC chassis) made by KW, the Comfort Coupe is equipped with a wheel and tire combination of a special kind: Good "transparent" Ultraleggera wheels in the dimension of 8x18 ET35 by OZ were fitted with tires in in 235/40-18. Of course the braking system has been adapted to the new power relationships. So on the front axle the Stoptech ST-40 brakes fulfill their duty with grooved 355 x 32 mm discs, including their Stahlbus valves. At the rear axle EBC Brakes act in combination with Stahlflex and also Stahlbus valves. At the front and the rear stabilizers by H&R have been installed for a more precise turn-in. Finally the CC had also to endure a wheel load wheel alignment in order to get the best optimization of the driving dynamics.

The result: A Volkswagen with so much power, almost a guarantee for the long-term use of the fast lane...

Related Articles

Add comment

subscribe to comments
comment rules Add comment

Comments (2)

slim
I agree 100% about those Fuggly a$$ wheels what are they like 225/50/18? Thats way too small for a decent sized 4 door car with this kind of power-500hp. I would rather see something like 20" Vossen CV3 staggered rims on it. And have I been under a rock too long? Since when did VW's come with 300hp stock with no turbo?? Really?? I thought the R32/ Golf R was the most powerful with 280ish hp... Guess I have to do some more reading up. Anyway this is a nice power upgrade along with the necessary wheel, brake, and suspension upgrades to keep it safe. Too bad this tuner didnt use this chance to introduce a mean bodykit for it.
Nov 27, 2012 8:49 pm
0 0
nahidrahman
ugly a$$ wheels dont even go with the car
Nov 27, 2012 8:08 am
0 0
http://content.worldcarfans.co/templates/0/18